Sunday, 30 September 2012

Good news everyone

Components selection

A tetrapod robot is a mechanical vehicle that walks on 4 legs.
After some research I've selected the following components to achieve my walking robot. I don't want to say too much information at same time as many of the topics below will be developed in future posts:
Microcontroller (Brain)
ATmega1280 (datasheet) mounted on a Arduino Mega microcontroller board.

Why? Lots of inputs/outputs (to talk to motors, sensors and other devices). Open source and extensible software and hardware (lots of info in the web), cost effective, clear programming environment. The fact to have the microcontroller on a board like the Arduino Mega simplifies the connexions and also allows us to interact with sensors and other devices (like distance sensor, mobile phones & Wii nunchuck). Has 4 serialcommunications.


RC Servos. Not decided model yet until a torque study is done. This study will provide size (torque) needed. I will purchase a couple of standard servos for first tests.

Why? Provide precise control of motor output (in terms of an angle). We will give sequences of angles to the legs in order to create walking motion.

SSC-32 Servo Controller (link)

This servo controller board can communicate with a microcontroller like Arduino via serial communication and control up to 32 servos.

Why? Why not... Joking. My tetrapod has 4 legs with 3 servos in each leg to give nice movements. To control 12 servos using the Arduino Mega is feasible but because each servo has 3 cables to be connected this can become quite messy. The SSC-32 has header pins that facilitates the connexion a lot. I purchased mine here.

On top of that the SSC-32 can control motion on speed, time or a combination. Also has "Group Move" commands that allow any combination of servos to begin and end motion at the same time, even if the servos have to move different distances. This is a very powerful feature for creating complex walking gaits for multi servo walking robots. It has also 4 digital inputs that can be handy.

Physical structure (legs and body)

Legs and body will carry motors, sensors , batteries and electric boards. I will use aluminium or plastic if possible to keep weight down. The physical size (leg length) has to be as small as possible again to keep weight down but also to keep torque as low as possible.

Why? The overall weight and length of parts attached to servos is a key factor when sizing the servos. A heavier and long legged robot requires bigger (more expensive) servos. We will see this when discussing the "Torque Study".


We need to give power to the Arduino, SSC-32 and servos. The 2 boards will be powered with a 9V battery and servos need 4V-7.4V (depending on type).
For servos I will use 7.4V Li-Po battery. Arduino can give power to other devices like sensors and Wii nunchuck.

Why? Because I have a 7.4V Li-Po battery from our RC helicopter. Although, even if I select servos rated to 6V I'm planning to use 7.4V battery as people has been using them with no issues. I invite you to contradict this (and the sooner the better as I don't want to burn any servo). The weight of this battery is also a lot less than 4AA batteries (this give us 6V (1.5Vx4)) and as I said before weight is critical for sizing cheaper servos.


We need to tell (program) the microcontroller what to do and when to do thinks. I will use the Arduino IDE. This is cross-platform application that "controls" your software to make sure the microcontroller will understand. Also will allow us to send the software to microcontroller so our brain knows what to do. The Arduino IDE comes with a C/C++library called "Wiring" (from the project of the same name), which makes many common input/output operations much easier

Why? Quite simple and easy language with lots of info in the net. And it's designed to talk to Arduino.
Recently I've heard that has some limitations but I will see if as I develop the project.

Hello and Welcome

Good news everyone!

I'm going to use this Blogg as a notebook for my robotic projects.

The main project is to create a "tetrapod" robot (spider inspired) but I may develop other small projecst as I go along.

I'm new to robotics so I'm going to learn as I develop the project. Please feel free to comment on my posts and I will appreciate any piece of advice you guys can give me.

Tuesday, 25 September 2012

Privacy policy

Privacy Policy for 

If you require any more information or have any questions about our privacy policy, please feel free to contact us by email at 

At, the privacy of our visitors is of extreme importance to us. This privacy policy document outlines the types of personal information is received and collected by and how it is used. 

Log Files
Like many other Web sites, makes use of log files. The information inside the log files includes internet protocol ( IP ) addresses, type of browser, Internet Service Provider ( ISP ), date/time stamp, referring/exit pages, and number of clicks to analyze trends, administer the site, track user’s movement around the site, and gather demographic information. IP addresses, and other such information are not linked to any information that is personally identifiable. 

Cookies and Web Beacons does use cookies to store information about visitors preferences, record user-specific information on which pages the user access or visit, customize Web page content based on visitors browser type or other information that the visitor sends via their browser. 

DoubleClick DART Cookie 
.:: Google, as a third party vendor, uses cookies to serve ads on
.:: Google's use of the DART cookie enables it to serve ads to users based on their visit to and other sites on the Internet. 
.:: Users may opt out of the use of the DART cookie by visiting the Google ad and content network privacy policy at the following URL - 

Some of our advertising partners may use cookies and web beacons on our site. Our advertising partners include ....
Google Adsense

These third-party ad servers or ad networks use technology to the advertisements and links that appear on send directly to your browsers. They automatically receive your IP address when this occurs. Other technologies ( such as cookies, JavaScript, or Web Beacons ) may also be used by the third-party ad networks to measure the effectiveness of their advertisements and / or to personalize the advertising content that you see. has no access to or control over these cookies that are used by third-party advertisers. 

You should consult the respective privacy policies of these third-party ad servers for more detailed information on their practices as well as for instructions about how to opt-out of certain practices.'s privacy policy does not apply to, and we cannot control the activities of, such other advertisers or web sites. 

If you wish to disable cookies, you may do so through your individual browser options. More detailed information about cookie management with specific web browsers can be found at the browsers' respective websites.